- For both guides.1. Undo the bolt (1a) and move support bar (1b).2. Undo the nuts.3. Remove guide (3a) releasing it from guide connection bar (3b).
- If necessary, unscrew bolts (1a) and remove seat anchorage mechanism (1b).
Refitting
(
Removing
)
- Check that the guide is not damaged.- If removed, position the seat anchorage mechanism and then tighten the bolts.- Refit the guide by attaching to the guide connection bar.- Tighten the nuts.- Position the mounting bar and tighten the bolt.- Only for inner guide.- Attach the sheath terminal to the retainer.- Attach the terminal to the lever.- Only for outer guide. Op. 7045A63 FRONT SEAT GUIDE OUTER GUARD (ONE), LH OR RH - R R- For both guides.- Lift up the seat sliding control lever and keep it raised, then manually slide the two guides until they are in the rear end of travel position to align them; lastly, release the sliding control lever and attach the retainers for the guides to the attachment teeth.
Removing
(
Refitting
)
- Only for outer guide. Op. 7045A63 FRONT SEAT GUIDE OUTER GUARD (ONE), LH OR RH - R R- Only for inner guide.1. Move lever (1a) in the arrowed direction and release terminal (1b) from lever (1c).- Release sheath terminal (2a) from retainer (2b).
