939011315 - 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED

Removing ( Refitting )     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Disconnect the backrest trim links.
1. Disconnect outer cushion trim retainers (1a) from seat frame profile (1b).2. Release the cushion trim retainer.3. Release rear part (3a) of cushion trim from retainers (3b).
1. Undo retainers (1a) from seats (1b); release retainer (1c) from the frame and move control unit with mount (1d).2. Detach the electrical connection for the cushion heater pad.
DescriptionComponent
LEFT SEAT HEATER    See O040 LEFT SEAT HEATER
PASSENGER SEAT HEATER    See O041 PASSENGER SEAT HEATER
-Remove the cushion with padding.
- If necessary, separate the cushion trim from the padding as indicated below.1.Cut the lower retainers with shears.2. Prise up trim (2a) and release from padding border (2b).3. Use cutters to cut all the upper backrest trim retainers.4. Separate trim (2a) from padding (2b).
Refitting ( Removing ) - Check that the cushion cover is not damaged.- If removed, position the cushion cover padding and crimp the retainers using special pliers.
Mould the cover on the padding during the various refitting stages.
- Fit the cover on the padding perimeter and crimp the lower retainers using special pliers.- Position the cushion trim with padding on the seat frame.- Secure the electrical connection for the cushion heater pad.- Place the thermostat with mount in position and attach the retainers.- Attach the rear part of the cushion trim to the retainers.- Do up the cushion trim retainer.- Connect the cushion trim outer retainers to the seat frame profile.- Connect the backrest trim links.    Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.