939011381 - 7065B14 ANCHORAGE ROD FOR (ONE) REAR SEAT BELT LEFT OR RIGHT - R.R.
Removing
(
Refitting
)
Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. 1. Undo the nut for the right or left rod involved.2. Remove the right mounting rod (2a) and separate it from the centre mounting rod (2b), or remove the left mounting rod (2c) and separate it from the end of the middle seat belt (2d).
Refitting
(
Removing
)
- Check that the mounting rod is not damaged.1. Connect the right mounting rod (1a) to the centre mounting rod (1b), or the left mounting rod (1c) to the end of the middle seat belt (1d), the place it in position.2. Screw in the nut and tighten it to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| REAR SEAT BELT MOUNTING ROD | Nut | M12 | 3.6 ÷ 4.4 |
