7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R. - Alfa - 159 - eLearn

939011382 - 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R.

) Op. 5550D16 THIRD BRAKE LIGHT - R+R Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. For the left and right sides. Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. Op. 7050A19 REAR SEAT BACKREST - R.R Op. 7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R Op. 7025B66 BOOT COMPARTMENT SEAL - R+R Op. 7040H80 REAR PARCEL SHELF - R.R. 1. Undo the bolt fixing the end of the seat belt.

1. Undo the bolts fixing the seat belt reel mount.2. Remove the seat belt with mount.

1. If necessary, release the rubber protection.2. Unscrew bolt (2a) and separate the seat belt with reel (2b) from mount (2c).

Refitting ( Removing

) - Check that the seat belt is not damaged.

If the belt is subjected to a great deal of strain, for example following an accident, it should be replaced together with the anchorages and the fixing bolts. Even if no apparent defects are present, the belt could have lost its properties of strength.

- If removed, position the reel on the mount and secure with a bolt, then tighten to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
REAR SEAT BELT REEL	Bolt	M8x20	2.2 ÷ 2.6

- Fit the rubber protection.- Place the seat belt with mount in position.- Screw in the bolts fixing the seat belt reel mount, then tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
REAR SEAT BELT REEL SUPPORT	Bolt	M8x20	2.2 ÷ 2.6

- Position the end of the seat belt and tighten the bolt to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
SEAT BELT ENDS	Bolt	M10	3.6 ÷ 4.4

Op. 7040H80 REAR PARCEL SHELF - R.R. Op. 7025B66 BOOT COMPARTMENT SEAL - R+R Op. 7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R Op. 7050A19 REAR SEAT BACKREST - R.R Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. Op. 5550D16 THIRD BRAKE LIGHT - R+R