939011403 - 7210E38 R.R. REAR SIDE DOOR

Removing ( Refitting ) - Lower the front window to the end of travel position.1. Undo the bolts (1a) fixing the check strap (1b) to the frame, then close the door momentarily so that the check strap is inside.2. Disconnect the electrical connection.

Description	Component
LEFT REAR DOOR COUPLING	See D035 LEFT REAR DOOR COUPLING
RIGHT REAR DOOR COUPLING	See D036 RIGHT REAR DOOR COUPLING

3. Undo the bolts for the hinges.4. Lift up the door and remove it. Refitting ( Removing ) - Check that the door is not damaged.1. Place the door on the hinges.2. Tighten the bolts for the hinges to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
DOOR HALF HINGES	Bolt	M6x14	1.2 ÷ 1.8

3. Connect the electrical connection.- Check that the various consumers on the door are working.4. Get the check strap (4a) out and tighten the bolts (4b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
DOOR CHECK STRAP	Bolt	M6x22	0.7 ÷ 1.1

- Check the door alignment and, if necessary, carry out:    Op. 7010A14 REAR SIDE DOOR - ADJUST CENTERING AND MOULDING - INCLUDES ADAPTATION OF HINGES AND SEALS ON DOOR COMPARTMENT