939005443 - 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED

Removing ( Refitting ) 1. Remove the lock protection (1a) releasing the inner retainers (1b) using the special tool.

Tool	Description	Function	Validity
1823015000	Knife	Retainer removal

1. Disconnect the electrical connection.

Description	Component
BOOT LOCK GEARED MOTOR	See N057 BOOT LOCK GEARED MOTOR

2. Undo the bolts.3. Keep the lock and motor and bridge. - If necessary, remove the motor.    Op. 7015B70 TAILGATE LOCK MOTOR - R.R AND CHECK LOCK SUPPLY LINE Refitting ( Removing ) - Check that the lock and the motor and bridge are not damaged.- If necessary, refit the motor.    Op. 7015B70 TAILGATE LOCK MOTOR - R.R AND CHECK LOCK SUPPLY LINE- Position the lock and motor and bridge.- Tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
TAILGATE LOCK	Bolt	M6x16	0.7 ÷ 1.1

- Connect the electrical connection.- Position the lock protection and attach the inner retainers.