939010711 - 1810A20 CLUTCH - R + R

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery    See A001 BATTERY
    Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 4410D10 FRONT SUSPENSION FRAME - R+R     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 4410A80 DAMPER LOWER FORK - R R (left and right sides).    Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R 1. Fit the flywheel lock.
ToolDescriptionFunctionValidity
1860846000Counter-torqueFlywheel lock
2. With the centering tool (2a) fitted, undo the bolts (2b) and remove the clutch drip tray (2c).
ToolDescriptionFunctionValidity
1870447000CenteringRemoving-refitting clutch plate/drip tray1.9 JTD 8V1.9 JTD 16V
- Remove the clutch plate.
Refitting ( Removing ) 1. Place the clutch plate and the clutch tray (1a) in their housing using the tool (1b) for centering.
ToolDescriptionFunctionValidity
1870447000CenteringRemoving-refitting clutch plate/drip tray1.9 JTD 8V1.9 JTD 16V
2. Tighten the new bolts securing the clutch tray to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Clutch drip trayBolt (pretreated to be replaced)M8(engine flywheel side) 2.3 - 2.8
- Remove the clutch plate and drip tray centering tool.
ToolDescriptionFunctionValidity
1870447000CenteringRemoving-refitting clutch plate/drip tray1.9 JTD 8V1.9 JTD 16V
3. Remove the flywheel lock.
ToolDescriptionFunctionValidity
1860846000Counter-torqueFlywheel lock
    Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R     Op. 4410A80 DAMPER LOWER FORK - R R (left and right sides).    Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 4410D10 FRONT SUSPENSION FRAME - R+R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR - Remove the vehicle from the lift.- Connect the negative battery terminal.