939011091 - 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.

Removing ( Refitting )

Before removing and refitting the Air Bag module the following preliminary operations must be carried out.

- Extract the electronic key.- Disconnect the battery leads and insulate them.- Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS    Op. 5580C AIR BAG SYSTEM

1. Undo the bolts.2. Move the Air Bag module (2a) slightly and disconnect the electrical connection (2b).

Description	Component
DRIVER''S KNEE AIR BAG	See Q014 DRIVER'S SIDE KNEE BAG

3. Keep the Air Bag module. - Place the Air Bag module in the special cupboard resting it on a free surface with the bag facing upwards. Refitting ( Removing ) - Observe the following precautions.

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.

- If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes together with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2005 for 2019).- Position the Air Bag module and fasten it using the bolts.- Connect the electrical connection and position the Air Bag module.- Tighten the bolts.

Component	Fastening	dia	Value (daNm)	Validity
KNEE AIR BAG MODULE	Bolt	M6x16	0.65 ÷ 0.95

- Connect the battery.- Use an Examiner to check that the system has not acquired errors during the operation.