C01 GEAR CONTROL HARDENING - Lancia - Ypsilon - eLearn

Smooth gear engagement without grating is difficult in all conditions

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check lubrication of gear control cable and gear selector fastenings	Continue to Step 1	Lubrication incorrect	Lubricate correctly
1	CHECK FIXING OF GEARBOX CONTROL CABLES	All OK	Problems met	Operation
	Check the fixings of the gearbox control cables: they should not be incorrectly fixed	Continue to Step 2	Cable not fitted correctly	Restore the correct fixing of the control cables ( Op. 2125C10)
2	CHECK GEARBOX CONTROL CABLES	All OK	Problems met	Operation
	Check gearbox control cables: The ball joints and the bushes should not be worn The control cables should not be worn	Continue to Step 3	Ball joints worn Worn cables	Replace the control cables ( Op. 2125C30 )
3	CHECK GEAR LEVER BALL	All OK	Problems met	Operation
	Check the gear lever ball joint: it should not be worn	Continue to Step 4	Ball worn	Replace the gear lever Op. 2125C16 .
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'