| | Results of the tests |
| 1 | SWITCH CHECK | All OK | Problems met | Operation |
|---|
| Check that the seat belt not fastened warning light switch is working properly | Continue to Step 2 | Switch not working | Replace the lower belt branch Op. Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R. |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Using the Examiner check, in the Instrument Panel Node ambient, that there are no errors and the following parameters are present. | Continue to Step 3 | There are errors | Continue in accordance with the instructions for the diagnostic equipment |
| 3 | ELECTRIC POWER SUPPLY CHECK | All OK | Problems met | Operation |
|---|
| Check that the Instrument Panel Node electrical power supply is correct. See See E4010 INSTRUMENT PANEL | Continue to Step 4 | Positive and/or earth electrical power supply fault. | Replace the defective component (if a fuse is involved, search for the cause of the problem) |
| 4 | CHECK WITH ACTIVE DIAGNOSIS | All OK | Problems met | Operation |
|---|
| With the Examiner in the Instrument Panel Node ambient, check, in active diagnosis, that the seat belts not fastened warning light is correctly activated | End of diagnosis | The seat belt warning light is not correctly activated | Replace the instrument panel Op. Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE |
