| | Results of the tests |
| 1 | REEL CHECK | All OK | Problems met | Operation |
|---|
| Check that the reel is fitted correctly, checking that the reference pin is correctly positioned in the bodyshell housing | Continue to Step 2 | Fitting irregular | Loosen the fixing bolt and position the reference lug correctly Retighten the bolt to the recommended torque |
| 2 | CHECK FOR PRESENCE OF FOREIGN BODIES | All OK | Problems met | Operation |
|---|
| Check that there are no foreign bodies inside the system | Continue to Step 3 | Presence of foreign bodies | Remove foreign bodies |
| 3 | BELT CHECK | All OK | Problems met | Operation |
|---|
| Check that there is no interference, deformation or marks caused by accidents | Continue to Step 4 | There is interference which slows down the sliding of the front belts | Eliminate the interference, if necessary, replace the belts Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R |
| There is interference which slows down the sliding of the rear side belts | Eliminate the interference, if necessary, replace the belts Op. Op. 7065B10 L/H OR R/H REAR SAFETY BELT (ONE) - R+R |
| There is interference which slows down the sliding of the centre rear belt | Eliminate the interference, if necessary, replace the belt Op. Op. 7065B18 CENTRE REAR SEAT BELT - R.R. |
| Presence of distortions on the front mounting rod | Replace the front rod Op. Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R. |
| Presence of distortion on the rear mounting rod | Replace the rear rod Op. Op. 7065B14 REAR SEAT BELT ANCHORAGE ROD , (ONE), LEFT OR RIGHT - R.R. |
| Presence of distortion on the front reel/pretensioner | Replace the front belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R |
| Presence of distortion on the rear side reel | Replace the rear side belt Op. Op. 7065B10 L/H OR R/H REAR SAFETY BELT (ONE) - R+R |
| Presence of distortion on the centre rear reel | Replace the centre rear belt Op. Op. 7065B18 CENTRE REAR SEAT BELT - R.R. |
| 4 | PRETENSIONER OPERATION CHECK | All OK | Problems met | Operation |
|---|
| Check that the pretensioner has not been activated as the result of an accident. If this is the case, there would be white powder on the spring casing, the reel would be locked and/or the belt deteriorated | Continue to Step 5 | Evidence of pretensioner activated | Replace the belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R |
| 5 | REEL RELEASE SYSTEM CHECK | All OK | Problems met | Operation |
|---|
| Check the reel release, rewinding the belt for a brief section and gently unwinding it | Continue to Step 6 | Front reel release system faulty | Replace the front belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R |
| Rear side reel release system faulty | Replace the side rear belt Op. Op. 7065B10 L/H OR R/H REAR SAFETY BELT (ONE) - R+R |
| Rear centre reel release system faulty | Replace the centre rear belt Op. Op. 7065B18 CENTRE REAR SEAT BELT - R.R. |
| 6 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | . | |