125000841 - 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION BLEED AIR (Smart gearbox)

Proceed with removal    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R.Proceed with removalSupply the vehicle using an auxiliary battery.    Op. 5530B10 BATTERY - R+R1. Loosen the bleed screw on the electro-hydraulic selection hydrauilc unit.Operate the electric pump for 20 seconds until the air is completely expelled.Tighten the bleed screw to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CRANKSHAFT FRONT COVER	M6	1

Connect the Examiner diagnostic equipment.Select ''Selespeed'' on the Examiner.Select ''Control Unit Test'' on the Examiner and select the ''Marelli Selespeed Automatic Transmission''.Press ''Active Diagnosis'' on the Examiner and select ''Clutch bleeding''.Continue with the procedure on the Examiner.Disconnect the auxiliary battery.Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..