0010T62 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY - Alfa - GT - eLearn

125000843 - 0010T62 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY

Position the vehicle on a lift.1. Remove the protective cap from the bleed valve on one brake caliper.2. Connect the recovery device (pipe and reservoir) to the bleed valve on the brake calliper.Open the bleed valve on the brake caliper.Operate the brake pedal until all the fluid emerges.Repeat the operations described above for the remaining brake calipers.

Proceed with the removal Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with the removal Op. 5530B10 BATTERY - R+R.Proceed with the removal Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..1. Open the protective cover.2. Connect the recovery device (pipe and tank) to the clutch hydraulic actuator fitting.3. Raise the retaining clip (3a) until the first click is heard and remove pipe (3b) by a sufficient amount to uncover the bleed hole.Operate the clutch pedal until the circuit is completely empty.

1. Cnnect the tool to the brake/clutch fluid reservoir.

	Description	Code
1	Brake - clutch bleed equipment	1.806.097.001

2. Slowly open the device reservoir cock and refill the brake/clutch systems with the recommended fluid.

	Type	Component	Description	Qty.
2	Fluid [I]	BRAKE-CLUTCH HYDRAULIC SYSTEM	TUTELA CAR TOP 4 FOR ALFA ROMEO	0.52

Wait for all the air in the hydraulic brake-clutch system to escape.Close the bleed valves on the brake callipers and fit protective plugs.Fit the pipe fully home in its seat on the hydraulic clutch actuator and secure with the retaining clip, then close the protective cover.Remove the fluid recovery devices.Remove the equipment.

	Description	Code
-	Brake - clutch bleed equipment	1.806.097.001

Proceed with the refitting Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with the refitting Op. 5530B10 BATTERY - R+R.Proceed with the refitting Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Remove the vehicle from the lift.Check that the clutch disengages properly and that the gears engage and that the brake system is efficient.