125001347 - 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE
Removing
(
Refitting
)
Position the vehicle on a lift.Proceed with the removal Op. 4450B02 LEFT FRONT WHEEL R R.Remove the protective cap from the bleed valve on the brake caliper.Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.Loosen the bleed valve on the brake caliper.Operate the brake pedal until the brake/clutch reservoir is drained.Proceed with the removal Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the removal Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..1. Disconnect the electrical connection from the brake fluid minimum level warning light switch.| Description | Connector | |
|---|---|---|
| 1 | Brake fluid level sensor (switch) | See K25 BRAKE FLUID LEVEL SENSOR (SWITCH) ( FRONT ) |
Refitting
(
Removing
)
Wash the inside of the brake fluid reservoir.Connect the flexible pipe from the reservoir to the clutch master cylinder, reservoir side.Place the brake fluid reservoir in position connecting it to the master cylinder, then secure it using the bolt.Proceed with the refitting Op. 3340B52 PUMP/CENTRAL OBS PIPE - R R(Both).Connect the electrical connection to the brake-clutch fluid minimum level warning light switch.Proceed with the refitting Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with the refitting Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the refitting Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with the refitting Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.Proceed with the refitting Op. 4450B02 LEFT FRONT WHEEL R R.Remove the vehicle from the lift.