2750995 - C01 GEAR CONTROL HARDENING

Smooth gear engagement without grating is difficult in all conditions
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Check lubrication of gear control cable and gear selector fasteningsContinue to Step 1Lubrication incorrectLubricate correctly
1CHECK FIXING OF GEARBOX CONTROL CABLESAll OKProblems metOperation
Check the fixings of the gearbox control cables: they should not be incorrectly fixedContinue to Step 2Cables not fitted correctlyRestore the correct fixing of the control cables Op.   2125C30 
2CHECK GEARBOX CONTROL CABLESAll OKProblems metOperation

Check gearbox control cables:

  • the ball joints and the bushes should not be worn
  • the control cables should not be worn
Continue to Step 3Ball joints or cables wornReplace the control cables Op.   2125C30 
3CHECK GEAR LEVER BALLAll OKProblems metOperation
Check the gear lever ball joint: it should not be wornContinue to Step 4Ball wornReplace the gear lever Op.   2125C22 
4Continue as instructed by the testerAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis