Y017 P0122 - ACCELERATOR PEDAL CONNECTOR - Fiat - CROMA - eLearn

The diagnostic equipment signals: Error P0191 (Fuel pressure signal)

This error is detected if there is interference with the signal for the sensor at Pin 43 of the electronic control module.

0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and select the Bosch EDC 16C39 electronic control unit, checking that none of the following errors are present:P0641 - Sensor power supply 1P0651 - Sensor power supply 2	Move on to Step 1	1. Error P0641 present	1. Proceed as instructed in the See Test 1060GM CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 1
		Move on to Step 1	2. Error P0651 present	2. Proceed as instructed in theSee Test 1060GN CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 2
1	ACCELERATOR PEDAL CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the accelerator pedal is working properly, carrying out the See Test 1068AC ACCELERATOR PEDAL CHECKS	End of diagnosis