194002860 - Y020 P0220 - ACCELERATOR 2 PEDAL

The diagnostic equipment signals: Error P0220 (Accelerator pedal sensor 2).
This error is detected if, with fault code P0651 not recognized, the junction unit input voltage (Pin 31) is more than 4.67 V (positive short circuit) or less than 0.15 V (short circuit to earth or break in the circuit). As a result, the accelerator pedal does not work.
0Preliminary checksALL OKPROBLEMS ENCOUNTEREDACTION
Connect the diagnostic equipment and select the Bosch EDC 16C39 electronic control unit, checking that none of the following errors are present:

  • P0641 - Sensor power supply 1
Move on to Step 1Error P0641 presentProceed as instructed in the    See Test 1060GM CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 1
1Accelerator pedal checkALL OKPROBLEMS ENCOUNTEREDACTION
Check that the accelerator pedal is working properly, carrying out the    See Test 1068AC ACCELERATOR PEDAL CHECKSEnd of diagnosis