194000433 - 1820B36 THREE-WAY CONNECTOR ON CLUTCH SLAVE CYLINDER - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R- Replace the brake-clutch fluid reservoir plug using the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/clutch fluid reservoir cap
1. Release the retaining clip (1a) and disconnect the pipe (1b) between the damper and the clutch operating cylinder (1b), operating cylinder side.
1. Release the retaining clip (1a) and remove the three-way connector (1b) from the clutch hydraulic actuator.
Refitting ( Removing ) - Place the clutch hydraulic actuator connector in its housing and secure it using the retaining clip.- Connect the pipe between the damper and clutch operating cylinder, operating cylinder side and secure it using the retaining clip.- Replace the brake-clutch fluid reservoir plug using the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/clutch fluid reservoir cap
    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R