194000687 - 5505C30 BUILT-IN WIRING UNDER DASHBOARD - R.R. WITH DASHBOARD TRIM REMOVED

Removing ( Refitting )     Op. 7040A90 REINFORCEMENT BRACKET ONE LEFT OR RIGHT BETWEEN FACIA SUPPORT BEAM AND BODY R R WITH FACIA REMOVED    Op. 7040A98 INSTRUMENT PANEL TRIM SUPPORTING CROSSMEMBER - R.R. WITH DASHBOARD REMOVED1. Release from retaining clips (1a) and detatch the integrated wiring (1b) from the rear of the instrument panel. 1. Release from retaining clips (1a) and detatch the integrated wiring (1b) from the front of the instrument panel.Remove the integrated wiring from the dashboard. Refitting ( Removing ) - Check that the integrated wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Position the electrical wiring in the housing on the beam.- Secure the wiring to the rear of the crossmember using the retaining clips.- Secure the wiring to the front of the crossmember using the retaining clips.    Op. 7040A98 INSTRUMENT PANEL TRIM SUPPORTING CROSSMEMBER - R.R. WITH DASHBOARD REMOVED    Op. 7040A90 REINFORCEMENT BRACKET ONE LEFT OR RIGHT BETWEEN FACIA SUPPORT BEAM AND BODY R R WITH FACIA REMOVED