194000708 - 5520B18 STARTER MOTOR SOLENOID - R+R WITH MOTOR REMOVED

Removing ( Refitting ) - Remove the upper engine protective cover.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 5520B10 STARTER MOTOR - R+R- Place the starter motor on the bench.1. Undo the fixing nut (1a) for the electrical connection (1b).
1. Undo the three fixing bolts (1a) for the solenoid coil (1b).
1. Extract the solenoid coil (1a) and keep the internal spring (1b).
1. Turn the moving part of the solenoid and extract it from the starter motor casing.
Refitting ( Removing ) - Check that the coil, the spring and the moving part of the starter motor solenoid are not damaged.- Fit the moving part of the solenoid on the starter motor casing, rotating it appropriately.- Fit the spring and the solenoid coil and secure it using the three fixing bolts.- Connect the electrical connection for the solenoid and fasten it using the nut.    Op. 5520B10 STARTER MOTOR - R+R    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R- Reconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
- Fit the upper engine protective cover.