194002173 - 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1060G50 THROTTLE BODY - R.R    Op. 1080C24 E.G.R. SYSTEM SOLENOID - R + R1. Disconnect the electrical connections from the injectors.

	Description	Connector
1	Injector	See N070 INJECTOR

2. Undo the bolts (2a) and rmove the electrical wiring (2b) aside. 1. Undo the pipe fastening connectors for the pipes from the fuel manifold to the injectors, injector side. 1. Unscrew the connectors (1a) and remove the pipes from the fuel manifold to the injectors (1b). Refitting ( Removing ) 1. Place the pipes from the fuel manifold to the injectors (1a) in their housings and secure them tightening the connectors (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pipes from fuel manifold to injectors	Connector	M14	(fuel manifold side) 2.2 - 2.4	1.9 JTD 8v

1. Tighten the connectors for the pipes from the fuel manifold to the injectors, injector side, to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pipes from fuel manifold to injectors	Connector	M12	(injector side) 2.2 - 2.4	1.9 JTD 8v

- Place the electrical wiring in position and fasten it using the bolts.- Connect the electrical connections to the injectors.    Op. 1080C24 E.G.R. SYSTEM SOLENOID - R + R    Op. 1060G50 THROTTLE BODY - R.R    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R