194003033 - 1080B40 CATALYTIC PRE-CONVERTER - R.R

Removing ( Refitting )

The catalytic preconverter is only fitted on the version without DPF.

- Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 1048B19 TURBOCHARGER AIR OUTLET HOSE -R.R.    Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 1088D24 WATER PUMP RIGID COOLANT INLET PIPE - R.R.    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R    Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R1. Undo the bolts (1a), (1b) and remove the catalytic converter mounting bracket (1c). 1. Loosen the collar (1a) and remove catalytic converter (1b). Refitting ( Removing ) 1. Place the catalytic conveter (1a) in its housing and fasten it tightening the collar (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Catalytic converter	Collar nut	M10	(turbocharger and exhaust manifold side) 2.2 - 2.6	1.9 JTD 16v1.9 JTD 8v2.4 JTD 20v

- Place the catalytic converter bracket in its housing and secure it using the bolts.     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R    Op. 1088D24 WATER PUMP RIGID COOLANT INLET PIPE - R.R.    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R    Op. 1048B19 TURBOCHARGER AIR OUTLET HOSE -R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R    Op. 0010T20 ENGINE COOLANT - CHANGE    Op. 1016A10 SOUND-PROOFING COVER - R.R- Remove the vehicle from the lift.