198000064 - 3380A10 HANDBRAKE LEVER - R+R

Removing ( Refitting )     Op. 7040A22 INSTRUMENT FACIA COMPLEMENTARY TRIM ELEMENT (ONE) - ARRANGE    Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L20 TUNNEL COVER - R.R 1. Loosen the handbrake lever cable adjustment nut.2. Disconnect the cables from the keeper. 1. Disconnect the electrical connection for the handbrake switch.

	Description	Connector
1	Handbrake applied switch	See I040 HANDBRAKE SWITCH

2. Undo bolts (2a) and remove handbrake lever (2b). 1. Open the retaining clip and remove the switch from the handbrake lever. Refitting ( Removing ) - Fit the switch on the handbrake lever and secure it with the associated retaining clip.- Place the handbrake lever in its housing and secure it by tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Handbrake lever	Bolt	M8	2.4 ÷ 3.0

- Connect the electrical connection for the handbrake switch.- Connect the cables to the keeper.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 7040A22 INSTRUMENT FACIA COMPLEMENTARY TRIM ELEMENT (ONE) - ARRANGE    Op. 3380A04 HANDBRAKE - ADJUST TRAVEL