4410C10 FRONT SUSPENSION ANTI-ROLL BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY - Fiat - NUOVA BRAVO - eLearn

198000216 - 4410C10 FRONT SUSPENSION ANTI-ROLL BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY

) Op. 4450B12 FRONT WHEELS (TWO) - R+R Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R. Op. 1008C34 BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R. Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R. Op. 1008C33 BRACKET ON ENGINE FOR LOWER REACTION ROD - R.R. Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. 1. Undo bolt (1a) and disconnect steering column (1b) from the steering box pinion.

Op. 1076B20 REAR EXHAUST SILENCER - R + R - For versions with DPF only: Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.- For versions without DPF only: Op. 1080B62 CATALYTIC CONVERTER - R + R Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R 1. Undo the bolts securing the anti-roll bar to the front suspension crossmember.2. Undo the bolts fixing the steering box to the front suspension crossmember.

1. Undo the nuts securing the anti-roll bar to the associated joints.

1. Unscrew nut (1a), fit tool (1b) and disconnect steering rod (1c) from the wheel strut.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

- Proceed in the same way for the left-hand side. 1. Move the steering box forwards and remove the anti-roll bar from the front suspension crossmember.

Refitting ( Removing

) - Place the anti-roll bar in its housing and secure it to the suspension crossmember and to the two joints.- Tighten the bolts and the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Anti-roll bar to front suspension crossmember	Bolt	M8	2.3 ÷ 2.7

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar joint	Nut (to replace)	M10	4.5 ÷ 5.5

- Position the steering box in its housing and secure it to the front suspension crossmember by tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering box to suspension crossmember	Bolt	M12	7.2 ÷ 8.8

- Connect the steering rods to the respective struts and tighten the new nuts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R - For versions with DPF only: Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.- For versions without DPF only: Op. 1080B62 CATALYTIC CONVERTER - R + R Op. 1076B20 REAR EXHAUST SILENCER - R + R - Connect the steering column to the steering box and tighten the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering column to steering box pinion	Bolt (to be replaced)	M10	5.0 ÷ 6.0

Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R. Op. 1008C33 BRACKET ON ENGINE FOR LOWER REACTION ROD - R.R. Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R. Op. 1008C34 BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R. Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R. Op. 4450B12 FRONT WHEELS (TWO) - R+R