198001695 - D009 ENGINE NOT FEELING ACCELERATOR PEDAL PRESSURE
The customer complains that: The engine does not react when the accelerator pedal is operated| Test results | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Check that the engine oil level is correct Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY Check that the air intake/vacuum circuit is working properly by carrying out the See Test 1048OA AIR INTAKE/VACUUM CIRCUIT CHECKCheck the condition of the fuel supply circuit and make sure that it is working properly by carrying out the See Test 1040OA Fuel supply circuit checkCheck the operation of the low pressure supply circuit by carrying out the See Test 1060OB Low pressure fuel supply circuit check | Move on to Step 1 | Oil level incorrect | Restore the correct engine oil level Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY | |
| 1 | MODE PARAMETERS CHECK | All OK | Problems encountered | Operation |
| Select the following control unit at the diagnostic equipment: EDC16C39 Diesel electronic injection control unit.Check the value of the following parameters:· Battery voltage See Test 5530BB BATTERY VOLTAGE CHECK· Accelerator pedal· Accelerator position 1 AD/C· Accelerator position 2 AD/C See Test 1068AC ACCELERATOR PEDAL CHECKS· Target Diesel pressure· Measured Diesel pressure See Test 1060GH DIESEL PRESSURE CHECK | End of diagnosis | |||