199002641 - S003 ENGINE KNOCKING

The customer complains of: Irregular combustion noise, engine cylinder head knock
Test results
1Ambient parameters checkAll OKProblems encounteredOperation
Select the following control unit at the diagnostic equipment: Marelli Diesel Injection 6F3 EOBD CAN (EP engine 1.3 JTD).Check the value of the following parameters:- Coolant temperature    See Test 1060OE ENGINE COOLANT TEMPERATURE SENSOR OPERATION CHECK. Atmospheric pressure    See Test 1060GD ATMOSPHERIC PRESSURE CHECKMove on to Step 2--
2Intake circuit checkAll OKProblems encounteredOperation
Check that the air intake/vacuum circuit is working properly by carrying out the    See Test 1048OA AIR INTAKE/VACUUM CIRCUIT CHECKMove on to Step 3--
3Preheating relay active diagnosisAll OKProblems encounteredOperation
Carry out the active diagnosis of the preheating relay, checking that the result is positiveMove on to Step 5The result of the active diagnosis is negativeMove on to Step 4
4Check on operation of heater plugsAll OKProblems encounteredOperation
Check that the heater plugs are working properly, by carrying out the    See Test 5520CA CHECK GLOW PLUG OPERATIONMove on to Step 5--
5Feed circuit checkAll OKProblems encounteredOperation
Check the condition of the fuel supply circuit and make sure that it is working properly carrying out the    See Test 1040OA FUEL SUPPLY CIRCUIT CHECKMove on to Step 6--
6Ambient parameters checkAll OKProblems encounteredOperation
Select the following control unit at the diagnostic equipment: Marelli Diesel Injection 6F3 EOBD CAN (EP engine 1.3 JTD).Check the value of the following parameters:- Press. Diesel measured    See Test 1060GH DIESEL PRESSURE CHECK- Pressure regulator opening (MPROP)    See Test 1060GR CHECK OPERATION OF FUEL PRESSURE SENSOR ON RAILEnd of diagnosis--