4410C10 FRONT SUSPENSION ANTI-ROLL BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY - Fiat - LINEA - eLearn

323002485 - 4410C10 FRONT SUSPENSION ANTI-ROLL BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY

) - Position the vehicle on a lift.- Remove the power steering fluid reservoir cap and remove the liquid using a syringe. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 4450B12 FRONT WHEELS (TWO) - R+R Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R. Op. 4130A10 POWER STEERING BOX - R+R 1. Undo the nuts (1a) securing the anti-roll bar to the joints (1b).

1. Undo the bolts securing the anti-roll bar to the suspension crossmember and remove it.

Refitting ( Removing

) - Place the anti-roll bar in its housing and secure it to the suspension crossmember and to the two joints.- Tighten the bolts and the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Anti-roll bar to front suspension crossmember	Nut	M8	2.3 ÷ 2.7

Component	Fastening	dia	Value (daNm)	Validity
Anti-roll bar joint	Nut	M10	4.5 ÷ 5.5

Op. 4130A10 POWER STEERING BOX - R+R Op. 1008C32 GEARBOX LOWER REACTION ROD -R.R. Op. 4450B12 FRONT WHEELS (TWO) - R+R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY - Remove the vehicle from the lift.