323001560 - 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Removing ( Refitting ) 1. Fit the tool.
This operation is necessary, in spite of the flywheel lock pin having been fitted, in order to lock the pulley, thus preventing it from bending during the loosening/tightening of the bolt with consequent damage to the internal locating pin.
ToolDescriptionFunctionValidity
2000004500TemplateCrankshaft timing1.4 8v1.4 16v TJET
2. Undo the toothed drive pulley bolt.- Remove the template.3. Remove the toothed drive pulley
Refitting ( Removing ) - Place the toothed drive pulley in its housing.- Fit the tool.
ToolDescriptionFunctionValidity
2000004500TemplateCrankshaft timing1.4 8v1.4 16v TJET
- Tighten the bolt securing the toothed drive pulley to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Crankshaft gearBoltM121.9 ÷ 2.1 + 107° + 113°1.4 16v TJET
- Remove the template.